Tag Archives: sprocket

China Best Sales Taper Lock Bush 1210 X20 2517 for Taper Pulley Sprocket Use with high quality

Product Description

Taper lock bushing,

        1. Taper bushes form the most convenient and cost effective method of fixing components to a

            Mating shaft, without the need for any machining process.

        2. Size ranges from 1,more information,please contact us.

        3. Easy to install and remove.

        4. Shallow keyway is available.

To Install:

1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already assembled).Remove any oil.lacquer,or dirt.
Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on 1 side only).

2.Oil thread and point of set screws or thread and under head of cap screws.
Place screws loosely in holes thatare threaded in hub 1 side see install bore.

3.Make sure bushing is free in hub.Slip assembly CHINAMFG shaft and locatd in position desired.

4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,
please refer to taper bushing screw torque which need to be asked.

5.If stall key,place it in the shaft keyway before install taper bushing.

6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO
Pulley Sizes: Type B
Manufacturing Process: Casting
Material: Iron
Surface Treatment: Oxygenation
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Can I find information on taper bush alternatives for specialized applications?

Yes, you can find information on taper bush alternatives for specialized applications. There are various alternatives available that cater to specific requirements and offer unique features or advantages over traditional taper bushes. Here are some common taper bush alternatives and where you can find information about them:

  • Keyless Bushings: Keyless bushings provide an alternative to traditional taper bushes by eliminating the need for keyways and key slots. These bushings utilize frictional forces to secure the shaft, offering precise positioning, high torque transmission, and easy installation and removal. Information on keyless bushings can be found in engineering catalogs, manufacturer websites, and technical articles on power transmission components.
  • Split Taper Bushings: Split taper bushings are designed with a split along their length, allowing for easy installation and removal without the need to disassemble the entire shaft assembly. They are particularly useful in applications where frequent maintenance or shaft replacement is required. Information on split taper bushings can be obtained from supplier catalogs, manufacturer websites, and technical resources on mechanical power transmission.
  • Locking Devices: Locking devices, such as locking collars or locking assemblies, provide an alternative to taper bushes by utilizing mechanical locking mechanisms to secure the shaft. These devices offer high holding power, concentricity, and resistance to axial and radial loads. Information on locking devices can be found in engineering handbooks, manufacturer catalogs, and online resources dedicated to power transmission components.
  • Adapters and Reducers: Adapters and reducers are used to connect shafts of different sizes or configurations. They allow for the mating of components with mismatched dimensions or when transitioning from one shaft type to another. Information on adapters and reducers can be found in engineering references, mechanical design handbooks, and manufacturer catalogs specializing in power transmission components.
  • Custom Engineered Solutions: In some specialized applications, custom engineered solutions may be required to meet specific design or performance criteria. Consulting with engineering firms specializing in power transmission or seeking advice from manufacturers and suppliers can provide insights into tailored alternatives for unique applications.

When researching taper bush alternatives for specialized applications, it is important to consider factors such as load capacity, torque transmission, alignment requirements, installation ease, and maintenance considerations. Evaluating the specific needs of your application and consulting with experts in the field can help you identify the most suitable alternative solution.

Information on taper bush alternatives can be found in engineering references, mechanical design handbooks, manufacturer catalogs, online resources, and industry-specific publications. Additionally, reaching out to manufacturers and suppliers directly can provide access to detailed product information, application guidelines, and technical support.

By exploring taper bush alternatives, you can discover innovative solutions that meet the unique demands of your specialized application, optimizing performance, efficiency, and reliability in your power transmission system.

taper bush

Can I find taper bushes suitable for both metric and imperial shaft sizes?

Yes, it is possible to find taper bushes that are suitable for both metric and imperial shaft sizes. Taper bushes are designed to provide compatibility and versatility in power transmission systems, accommodating different shaft measurement systems. Here’s how you can find taper bushes suitable for both metric and imperial shaft sizes:

  • Dual Measurement Taper Bushes: Some taper bush manufacturers offer dual measurement taper bushes that are specifically designed to accommodate both metric and imperial shaft sizes. These taper bushes have dimensions and tolerances that allow them to fit and secure onto shafts measured in either the metric or imperial system. They provide a convenient solution for applications where both metric and imperial shafts are present, eliminating the need for separate taper bushes for each shaft measurement system.
  • Conversion Bushings: Conversion bushings or adapters can be used to bridge the gap between metric and imperial shaft sizes. These bushings typically have different bores on each end, allowing them to connect a metric taper bush to an imperial shaft or vice versa. By using conversion bushings, you can achieve compatibility between taper bushes and shafts measured in different systems, providing a flexible solution for mixed measurement applications.
  • Interchangeable Components: Some power transmission systems may utilize interchangeable components that can accommodate both metric and imperial shaft sizes. For example, certain pulleys, sprockets, or gears may have multiple sets of keyways or mounting configurations that can be used with taper bushes for both measurement systems. By selecting these interchangeable components, you can achieve compatibility with different shaft sizes without the need for separate taper bushes.
  • Consulting with Suppliers or Manufacturers: If you have specific requirements for taper bushes that can accommodate both metric and imperial shaft sizes, it is advisable to consult with suppliers or manufacturers directly. They can provide guidance and information on the availability of taper bushes suitable for mixed measurement applications. They may also offer customized or special order options to meet your specific needs.

When searching for taper bushes suitable for both metric and imperial shaft sizes, it is important to consider factors such as dimensional compatibility, tolerances, and the specific requirements of your power transmission system. Ensure that the taper bushes you choose are designed to securely fit and provide reliable connections with both metric and imperial shafts.

By exploring the options mentioned above and consulting with industry experts or suppliers, you can find taper bushes that can accommodate both metric and imperial shaft sizes, offering flexibility and compatibility in your power transmission system.

taper bush

Where can I get information on the key dimensions of taper bushes for compatibility?

If you are looking for information on the key dimensions of taper bushes for compatibility, there are several sources where you can obtain this information. Here are some common places to find the key dimensions of taper bushes:

  • Manufacturer’s Catalogs and Websites: Taper bush manufacturers often provide detailed catalogs or product listings on their websites. These catalogs typically include comprehensive information about the dimensions, sizes, and specifications of their taper bushes. You can find details such as bore diameter, taper angle, outside diameter, keyway dimensions (if applicable), and overall length. Manufacturer catalogs are valuable resources for understanding the compatibility of taper bushes with different shaft sizes and mating components.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to mechanical power transmission or bushing selection may contain information on the key dimensions of taper bushes. These resources are commonly available in libraries, technical bookstores, or online platforms. They provide in-depth knowledge about various types of bushings, including taper bushes, and offer guidance on selecting the appropriate size and dimensions based on shaft requirements.
  • Supplier or Distributor Documentation: If you are working with a specific supplier or distributor for taper bushes, they may provide documentation that includes dimensional information. This documentation can be in the form of product datasheets, brochures, or technical specifications. Check with your supplier or distributor to see if they have any resources available that outline the key dimensions of the taper bushes they offer.
  • Online Engineering Resources: Online platforms dedicated to mechanical engineering, industrial equipment, or power transmission systems can be excellent sources of information on taper bush dimensions. Websites, forums, or communities focused on mechanical engineering topics often have discussions, articles, or downloadable resources that include dimensional data for taper bushes. Conducting targeted searches using relevant keywords can help you find these online resources.
  • Consulting with Industry Experts: If you require specific or detailed information regarding the key dimensions of taper bushes for compatibility, consulting with industry experts or professionals in the field can be beneficial. These experts have practical experience and knowledge about power transmission systems and can provide guidance on selecting the appropriate taper bush dimensions based on your specific application requirements.

When accessing information on the key dimensions of taper bushes, it’s important to refer to reliable and trusted sources. Ensure that the information is up-to-date and aligns with industry standards. Double-check any measurements or specifications to ensure accuracy before making final decisions on taper bush compatibility.

By utilizing these various sources, you can gather the necessary information on the key dimensions of taper bushes to determine their compatibility with different shaft sizes and mating components in your power transmission system.

China Best Sales Taper Lock Bush 1210 X20 2517 for Taper Pulley Sprocket Use   with high quality China Best Sales Taper Lock Bush 1210 X20 2517 for Taper Pulley Sprocket Use   with high quality
editor by CX 2024-03-28

China Standard Taper Bore Roller Chain Sprocket differential bushing

Product Description

 

Product Description

Chain sprocket

With more than 15 years’ experience, high-precision equipment and strict management system, CIMO can provide sprockets for you with stable quality and best service.
 

Item Sprocket
Standard DIN, KANA, ANSI, ISO, etc
Material C45, stainless steel SS304 & SS316, Cast iron, etc
Bore Pilot bore, finished bore, taper bore
Surface Treatment Black oxided, Zinc plated, Electrophoresis, etc
Heat treatment Teeth inductive hardened HRC45-50
Process Forging, Cutting, Hobbing teeth, CNC Lathe machining

 

European Type 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B
American Type 25, 35, 40, 50, 60, 80, 100, 120, 140, 160, 200, 240

Taper bore sprockets

 
Finished bore sprockets  

Idler sprockets with ball bearing

 

Double simplex sprockets

 

Sprockets with split taper bushings

 

Sprockets with QD bushings

 
Double sprockets for 2 single chains  

Double pitch sprockets   

C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080
Platewheels for Conveyor chain 20x16mm, 30×17.02mm

Detailed Photos

 

Workshop

 

 

Packaging & Shipping

 

Export wooden box

FAQ

 

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: 10-20 days
2.Production Lead-times: 30-45 days after order confirmed.

Q3: What is your advantages?
1. The most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.

 

Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Chain
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Sprocket
Material: Steel C45
Customization:
Available

|

Customized Request

bushing clamp
China Standard Taper Bore Roller Chain Sprocket   differential bushingChina Standard Taper Bore Roller Chain Sprocket   differential bushing
editor by CX 2023-04-26

China DIN, ANSI, ISO Standard Sprocket 80b30ht bushing assembly

Product Description

XIHU (WEST LAKE) DIS.HUA Chain Group is the most professional manufacturer of power transmission in China, manufacturing roller chains, industry sprockets, motorcycle sprockets, casting sprockets, different type of couplings, pulleys, taper bushes, locking devices, gears, shafts, CNC precision parts and so on. We have passed ISO9001, ISO14001, TS16949 such quality and enviroment certification

We adopt good quality raw material and strict with DIN, ANSI, JIS standard ect, We have professional quality conrol team, complet equipment, advanaced technology. In 1999, Xihu (West Lake) Dis.hua obtained ISO9001 Certificate of Quality Assurance System, besides, the company also devotes itselt o environmental protection, In2002, it also obtained ISO14001 Certificate of Environment Management System.

DIN, ANSI, JIS, Standard Sprocket instruction:

EUROPEAN STHangZhouRD SERIES AS FOLLOWS:
Sprockets & Platewheels
Fininshed Bore Sprockets
Stainless Steel Sprockets
Taper Bore Sprockets
Ball Bearing Idler Sprockets
Double Srpockets for Two Single Chains

AMERICAN STHangZhouRD SERIES AS FOLLOWS:
Steel Stock Bore Sprockets
Finished Bore Sprockets
Doubel Sprockets for Two Single Chains
Taper Bore Srpockets
Double Pitch Sprockets
Sprockets with Split Taper Bushings
Sprockets with QD Bushings

ASIAN STHangZhouRD SERIES AS FOLLOWS:
Finished Bore Sprockets
Stock Bore Sprockets &platewheels
Double pitch Sprockets
Double Sprockets for Two Single Chains

Product name  DIN, ANSI, ISO Standard Sprocket 80B30HT
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted etc.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,final-check before package by  professional Quality inspector
Size Drawings
Package Wooden Case/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
Lead Time 15-25days samples. 30-45days offcial order

 

To Be Negotiated 50 Pieces
(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Carbon Steel

###

Customization:

###

Product name  DIN, ANSI, ISO Standard Sprocket 80B30HT
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted etc.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,final-check before package by  professional Quality inspector
Size Drawings
Package Wooden Case/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
Lead Time 15-25days samples. 30-45days offcial order
To Be Negotiated 50 Pieces
(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Carbon Steel

###

Customization:

###

Product name  DIN, ANSI, ISO Standard Sprocket 80B30HT
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted etc.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,final-check before package by  professional Quality inspector
Size Drawings
Package Wooden Case/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
Lead Time 15-25days samples. 30-45days offcial order

bushing design
China DIN, ANSI, ISO Standard Sprocket 80b30ht     bushing assembly		China DIN, ANSI, ISO Standard Sprocket 80b30ht     bushing assembly
editor by czh 2022-12-06

China Guaranteed Quality Finished Bore Qd Sprocket Chain & Sprocket in Steel and Stainless Steel bushing and bearing

Product Description

Guaranteed Quality Finished Bore QD sprocket chain & sprocket in steel and stainless steel

QD bushing is easy to install and remove. They are separated by the barrel and have a taper to provide accurate clamping on the shaft. They are keyed to the post and hub for blind installation.
How to install QD sprocket
Make sure that the tapered surface of the bushing and the inside of the driven product are clean and free of anti-seize lubricant
Place the bushing in the sprocket or other parts.
Loosely place the cap screw in the upper pull hole. The bushing remains loose to ensure a sliding fit with the shaft.
Use the keys on the shaft to slide the sprocket to the desired position on the post. Make sure that the head of the cap screw is accessible.
Align the sprocket. Tighten the screws alternately and gradually until they are tightened (see the table below). Do not use an extension on the wrench handle. Do not allow the sprocket to contact the bushing flange. There should be a gap between the bushing flange and the sprocket.
The QD sprocket has a quick removal bushing and a flange that connects the bushing to the sprocket. It is also designed with a four-degree taper and cap screws for installation. The bushing also has hardened teeth to withstand wear.
size
There are QD sprockets of various sizes. These single-strand steel sprockets can be ordered in 2 styles: with and without hardened teeth. The diameter of the sprocket determines how many teeth it can hold.
matters needing attention
It is essential to understand the correct procedure before installing the QD sprocket. To ensure a successful installation, you need to follow these steps. First, you need to check the sprocket hub for any contamination. Next, you need to install the QD bushing in the correct position, which should be done with a torque wrench. Then gradually tighten the bolts evenly. Be careful not to overtighten the bolts. Otherwise, the bushing will be damaged prematurely. Also, ensure clearance between the QD bushing flange and the chain hub. This clearance prevents excessive stress on the chain hub.
The QD bushing is designed to insert into the tapered hole of the sprocket. The bushing is flanged to the sprocket, and the flange is held in place with cap screws. Another precaution when using QD sprockets is to avoid applying anti-seize lubricant to the cones. This may damage the sprocket and invalidate any manufacturer’s warranty.
QUICK REMOVAL BUSHING
The number of teeth and chain size of the QD sprocket of the CZPT inlet line are as follows. The most popular lengths are 40, 50, 60, and 120. These sprockets can be easily removed.
The QD sprocket has a tapered flange that connects the bushing to the sprocket. The flange is secured to the sprocket with cap screws. This facilitates removal and installation.
The following steps are required to install the QD bushing. First, ensure that the bushing flange is clean and dry. Then, align the sprocket with the bushing. If there is a gap between the flange and the chain hub, lock washers can be used to ensure proper sealing.
Hardened teeth
The hardened teeth on the QD sprocket are designed to be more durable. They have a black oxide surface to prevent rusting and are precision machined for maximum transmission efficiency. In addition to being tough, they can also withstand bad weather.
In addition to hardened teeth, Martin’s saber tooth sprocket has also been set to extend the life of the chain. This type of sprocket is recommended for 4 to 1 and smaller ratios. It is also recommended for sprockets with less than 24 teeth.
Smart tooth technology is another feature that makes these sprockets unique. It includes a wear indicator pin on the thrust face of the teeth. The wear indicator pin will be exposed when the profile begins to reverse.

Business type

Manufacturer & Exporter

 

Main export market

Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa

 

Material

Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass

 

Manufacturing method

Forged and then machined, hobbed, if need can also weld

 

 

Heat treatment

Hardening and Tempering, High Frequency Quenching, Carburizing Quenching

 

 

Surface treatment

Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on

 

 

Model

ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240

DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A

DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B

 Process

Forging, Hobbing, Precision machining

 

 

Teeth

9T-100T

 

 

Type

Type A sprockets :Plate (without Hub)

Type B sprockets:One side with hub

Type C sprockets: Double side with hub

Finished bore sprockets:With the inner hole ,keyway and screw

Sprocket quality testing

In each work process and after the final manufacture of the product, all items will be thoroughly inspected and tested to ensure the best product quality on the market.

Multiple processing methods
other sprockets
We also provide various chains

US $50-100
/ Piece
|
100 Pieces

(Min. Order)

###

After-sales Service: Installation Guide 3-Year Warranty
Warranty: Installation Guide 3-Year Warranty
Usage: Popular Type, Tailored Version
Loading Weight: 80T
Certification: ISO/TS16949, CCC, DOT, ISO, CE
Structure: Dump Trailer

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

Business type
Manufacturer & Exporter
 
Main export market
Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
 
Material
Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass
 
Manufacturing method
Forged and then machined, hobbed, if need can also weld
 
 
Heat treatment
Hardening and Tempering, High Frequency Quenching, Carburizing Quenching
 
 
Surface treatment
Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
 
 
Model
ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240
DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A
DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B
 Process
Forging, Hobbing, Precision machining
 
 
Teeth
9T-100T
 
 
Type
Type A sprockets :Plate (without Hub)
Type B sprockets:One side with hub
Type C sprockets: Double side with hub
Finished bore sprockets:With the inner hole ,keyway and screw
US $50-100
/ Piece
|
100 Pieces

(Min. Order)

###

After-sales Service: Installation Guide 3-Year Warranty
Warranty: Installation Guide 3-Year Warranty
Usage: Popular Type, Tailored Version
Loading Weight: 80T
Certification: ISO/TS16949, CCC, DOT, ISO, CE
Structure: Dump Trailer

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

Business type
Manufacturer & Exporter
 
Main export market
Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
 
Material
Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass
 
Manufacturing method
Forged and then machined, hobbed, if need can also weld
 
 
Heat treatment
Hardening and Tempering, High Frequency Quenching, Carburizing Quenching
 
 
Surface treatment
Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
 
 
Model
ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240
DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A
DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B
 Process
Forging, Hobbing, Precision machining
 
 
Teeth
9T-100T
 
 
Type
Type A sprockets :Plate (without Hub)
Type B sprockets:One side with hub
Type C sprockets: Double side with hub
Finished bore sprockets:With the inner hole ,keyway and screw

bushing bore
China Guaranteed Quality Finished Bore Qd Sprocket Chain & Sprocket in Steel and Stainless Steel     bushing and bearing	China Guaranteed Quality Finished Bore Qd Sprocket Chain & Sprocket in Steel and Stainless Steel     bushing and bearing
editor by czh 2022-11-28

china Cheap High Quality Cast Iron Wheel Sprocket manufacturers

Merchandise Description

Standard CZPT s Introduction&colon

Material&colon DIN GG20&comma GG25 or or C1045 steel&comma For every batch of casting&comma inspection certification like chemcial composition&comma tensile toughness&comma hardness and so forth will be analyzed & issued&semi For every batch metal content&comma subsupplier will provide substance certificate issued by steel plant&period of time

Machining&colon Precesion machining for pulley with stock bore&comma taper bore and equipment&period of time
Finish&colon Black oxide for steel CZPT s&comma Black phosphate for forged iron CZPT s&period of time
Package deal&colon CZPT carton&time period

Merchandise Description&colon
We are principal provider of all sorts of sprocket&comma special sprocket&comma chain wheel&comma taper lock&comma pulley&comma chain coupling&comma shaft&comma CZPT and so on&period

Sprocket with pilot bore&comma sprocket with ending bore&comma sprocket with taper bore&comma sprocket with keyway&comma sprocket with screw established&comma sprocket with hub&comma basic sprocket&comma duplex sprocket&comma triplex sprocket and so on&period of time When you provide enquiry&comma make sure you enable us know the floor remedy of sprocket&lpargrey&comma blackened and so on&rpar&comma tooth remedy&lparheat-remedy on tooth or not&rpar&comma common&lparKANA&comma SATI and so on&rpar together with depth item&time period If you need to have particular sprocket&comma please send us drawing or send out us sample&interval Make sure you come to feel free to make contact with with us with your detail ask for&interval

Each and every type of regular sprocket merchandise
one&period of time Rang of items
03&sol04&sol05B&sol06B&sol08B&sol10B&sol12B&sol16B&sol20B&sol24B&sol28B&sol32B
twenty five&sol35&sol40&sol41&sol50&sol60&sol80&sol100&sol120&sol140&sol160&sol180&sol200&sol240
two&interval CZPT &time period Processing diameter&colon ø &equals1450mm
The sequence of finished-bore sprocket
one&period Rang of product
06B&sol08B&sol10B&sol12B&sol16B&sol20B&sol
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160
2&interval CZPT &interval Processing diameter&colon ø &equals1450mm
Taper bore sprocket of BTL sequence
one&time period Rang of merchandise
06B&sol08B&sol10B&sol12B&sol16B&sol20B
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160
two&time period CZPT &period Processing diameter&colon ø &equals1450mm&period of time
Max&period of time Coordinated taper bush&colon 8065
Taper bore sprocket of QTL serie
one&period of time Rang of items
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160&sol200
two&period of time CZPT &time period Processing diameter&colon ø &equals1450mm&time period
Max&period Coordinated QD go over&colon N
STL taper bore sprockets
one&period Rang of merchandise
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160&sol200
2&interval CZPT &period Processing diameter&colon ø &equals1450mm&period of time
Max&period of time Coordinated Browning cover&colon U2
Molten sprocket wheel
1&time period Rang of products
06B&sol08B&sol10B&sol12B&sol16B&sol20B&sol24B&lpartechnological-bore & BTL taper bore&rpar
We come to feel honoured to offer manufactured to buy merchandise&period of time
2&period CZPT &time period Processing diameter&colon ø &equals1450mm&interval CZPT &period Coordinated taper
Bush&colon 5050
3&period CZPT &time period CZPT ght of the casting 2000kg&time period
Coarse pitch conveyor sprocket
one&period Rang of merchandise
P50&solP75&solP100&solP50&period8
BTL taper bore sprocket of common collection
one&period Rang of item
06B&sol08B&sol10B&sol12B&sol16B&sol20B
35&sol40&sol50&sol60&sol80&sol100&sol120&sol140&sol160
Flat-prime conveyor sprockets
1&period Rang of product
P 1&sol2″

 

A tapered bushing, also recognized as a tapered lock bushing, is a tapered, non-flanged, break up bushing whose tapered sleeve is both screwed or tightened with a socket head cap screw and squeezed on to the shaft so that It is mounted on the shaft. Protects a extensive selection of pulleys, sprockets, flanged hubs, and couplings. These bushings are utilized in pulleys and sprockets to boost clamping drive, while standard bore products lock onto the shaft only with a keyway and set screw. All bushings equipped by EP are separately produced of high-quality materials and boxed grub screws.
china Cheap High Quality Cast Iron Wheel Sprocket manufacturers

china factory Steel Agricultural Chain Sprocket (S32A, S52A, S55A) manufacturers

Merchandise Description

Steel CZPT Chain CZPT (S32A,S52A,S55A)

We mostly export:
Stock Sprocket

Finsished Bore Sprocket

Taper Bore Sprocket

Cast Iron Sprocket

Tensional Sprocket

Double Simplex Sprocket

Stainless Steel Sprocket

Wheel For Hinge Sprocket

All Kinds Of Conveyor Sprocket With Long Pitch

Decide on CZPT
  CZPT  was established in 2005.With “Customer first,quality first” service concept, we had become one of the main export chain and transmission equipments in China. TAI at present mainly produce various specifications of standard and non-standard chains, such as transmission chain, conveyor chain, agricultural chain, motorcycle chain, stainless steel chain, also produce various specifications and materials of chain sprocket, pulley, timing pulley, taper bush and coupling.
 

china factory Steel Agricultural Chain Sprocket (S32A, S52A, S55A) manufacturers

china manufacturer manufacturer Custom Customized Sand Casting Steel Transmission Sprocket manufacturers

Solution Description

Sand CZPT Steel Transmission sprocket
1) Standard inventory and completed bore sprockets/plate wheels in accordance to requirments
2) Taper bore sprockets
three) CZPT s with QD bushes
four) Loafer sprockets
5) Double single sprockets and prolonged pitch sprockets
six) CZPT s and plate wheels for conveyor chains
seven) CZPT s for desk top sprockets
eight) CZPT metal, carbon metal, solid iron sprockets
9) CZPT s for CZPT chains
10) CZPT s with break up taper bushes
11) Induction harden teeth for all sprockets on CZPT ers’ requests
twelve) CZPT s for motorcycles
thirteen) CZPT produced in accordance to CZPT ers’ styles

OEM and CZPT ized Support:
one. Quality promise
Chemical checking
Dimension inspected
2. High quality doc
Complete Q. A doc as per client request
three. Packing and CZPT
Common export deal(carton/wood case/pallet)

Our Service:
one.Your inquiry related to CZPT merchandise or prices will be replied in 24 several hours.
two.Personal method in accordance to CZPT ers’ unique drawing requests.
3.Producer with big capability,ensures the CZPT manufacturing cycle following confirming the buy.
four.Security of sales location and non-public data for all of CZPT CZPT ers.

 

china manufacturer  manufacturer  Custom Customized Sand Casting Steel Transmission Sprocket manufacturers

china best High Quality Motorcycle Steel Chain Sprocket manufacturers

Solution Description

Standard CZPT s Introduction&colon

Content&colon DIN GG20&comma GG25 or or C1045 steel&comma For each batch of casting&comma inspection certification which includes chemcial composition&comma tensile toughness&comma hardness and so on will be analyzed & issued&semi For every batch steel materials&comma subsupplier will give materials certification issued by steel plant&time period

Machining&colon Precesion machining for pulley with stock bore&comma taper bore and gear&time period
End&colon           Black oxide for steel CZPT s&comma Black phosphate for cast iron CZPT s&period
Bundle&colon    According The CZPT ers’demands

Item Description&colon
We are main supplier of all kinds of sprocket&comma unique sprocket&comma chain wheel&comma taper lock&comma pulley&comma chain coupling&comma shaft&comma CZPT and so on&time period

Sprocket with pilot bore&comma sprocket with finishing bore&comma sprocket with taper bore&comma sprocket with keyway&comma sprocket with screw set&comma sprocket with hub&comma plain sprocket&comma duplex sprocket&comma triplex sprocket and so on&period of time When you supply enquiry&comma please allow us know the floor treatment method of sprocket&lpargrey&comma blackened and so on&rpar&comma tooth therapy&lparheat-remedy on tooth or not&rpar&comma regular&lparKANA&comma SATI and so on&rpar jointly with detail item&time period If you need specific sprocket&comma remember to deliver us drawing or send out us sample&interval Please truly feel free of charge to speak to with us with your detail ask for&period

Each sort of common sprocket merchandise
one&time period Rang of merchandise
03&sol04&sol05B&sol06B&sol08B&sol10B&sol12B&sol16B&sol20B&sol24B&sol28B&sol32B
25&sol35&sol40&sol41&sol50&sol60&sol80&sol100&sol120&sol140&sol160&sol180&sol200&sol240
two&period CZPT &period of time Processing diameter&colon ø &equals1450mm
The collection of finished-bore sprocket
1&period Rang of item
06B&sol08B&sol10B&sol12B&sol16B&sol20B&sol
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160
two&interval CZPT &period of time Processing diameter&colon ø &equals1450mm
Taper bore sprocket of BTL sequence
one&time period Rang of product
06B&sol08B&sol10B&sol12B&sol16B&sol20B
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160
two&period of time CZPT &period of time Processing diameter&colon ø &equals1450mm&time period
Max&time period Coordinated taper bush&colon 8065
Taper bore sprocket of QTL serie
1&period Rang of merchandise
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160&sol200
two&interval CZPT &period of time Processing diameter&colon ø &equals1450mm&interval
Max&period Coordinated QD protect&colon N
STL taper bore sprockets
1&interval Rang of items
35&sol40&sol41&sol&sol50&sol60&sol80&sol100&sol120&sol140&sol160&sol200
two&period CZPT &time period Processing diameter&colon ø &equals1450mm&time period
Max&period of time Coordinated Browning cover&colon U2
Molten sprocket wheel
1&period Rang of merchandise
06B&sol08B&sol10B&sol12B&sol16B&sol20B&sol24B&lpartechnological-bore & BTL taper bore&rpar
We come to feel honoured to supply created to order product&time period
2&interval CZPT &interval Processing diameter&colon ø &equals1450mm&period of time CZPT &time period Coordinated taper
Bush&colon 5050
three&period of time CZPT &interval CZPT ght of the casting 2000kg&period of time
Coarse pitch conveyor sprocket
one&interval Rang of merchandise
P50&solP75&solP100&solP50&period8
BTL taper bore sprocket of regular collection
one&period Rang of item
06B&sol08B&sol10B&sol12B&sol16B&sol20B
35&sol40&sol50&sol60&sol80&sol100&sol120&sol140&sol160
Flat-leading conveyor sprockets
1&period Rang of merchandise
P 1&sol2″

 

china best High Quality Motorcycle Steel Chain Sprocket manufacturers

china best Sand Casting Cast Iron Chain Sprocket manufacturers

Solution Description

Forging Approach Metal Chain Wheel
1) Regular inventory and finished bore sprockets/plate wheels according to requirments
2) Taper bore sprockets
three) CZPT s with QD bushes
four) Idler sprockets
five) Double one sprockets and extended pitch sprockets
six) CZPT s and plate wheels for conveyor chains
7) CZPT s for desk best sprockets
8) CZPT steel, carbon metal, cast iron sprockets
nine) CZPT s for CZPT chains
ten) CZPT s with break up taper bushes
eleven) Induction harden teeth for all sprockets on CZPT ers’ requests
twelve) CZPT s for bikes
13) CZPT produced in accordance to CZPT ers’ styles

OEM and CZPT ized Provider:
one. High quality ensure
Chemical examining
Dimension inspected
two. Top quality doc
Full Q. A doc as for each consumer request
three. Packing and CZPT
Common export package deal(carton/picket case/pallet)

Our Support:
1.Your inquiry connected to CZPT items or charges will be replied in 24 several hours.
2.Specific method according to CZPT ers’ particular drawing requests.
3.Producer with massive potential,assures the CZPT manufacturing cycle soon after confirming the order.
four.Defense of income location and personal info for all of CZPT CZPT ers.

Conical locking bushings have been rooted in common and sequence drives as a easy hub-to-hub link. EP delivers a entire selection of drive factors, each regular, and custom made. These components are obtainable from inventory in standard sizes 1008 to 5050 and specific measurements 6050 to 10085 for all inner diameters. Gain from our huge product variety, substantial storage warehouses, short-term availability, and the chance to speedily create personalized merchandise from one particular provider.
china best Sand Casting Cast Iron Chain Sprocket manufacturers

china best OEM Special Sprocket Chain Wheels manufacturers

Merchandise Description

XIHU (WEST LAKE) DIS.HUA Chain CZPT is the most skilled company of CZPT transmission in CZPT , manufacturing roller chains, market sprockets, motorbike sprockets, casting sprockets, different variety of couplings, pulleys, taper bushes, locking devices, gears, shafts, CNC precision areas and so on. We have handed ISO9001, ISO14001, TS16949 these kinds of high quality and enviroment certification.

Special sprocket with unique surface area therapy known as vacuum coating
Simplex sprocket with particular hub
Carburizing, zinc plated

Product name  OEM Particular CZPT Chain Wheels
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
two. Steel:C45(K1045), C46(K1046),C20
three. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
four. Bronze: C51000, C52100, C54400, etc
five. Iron: 1213, 12L14,1215
six. Aluminum: Al6061, Al6063
seven.OEM according to your request
Area Remedy Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black area painted and so forth.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,last-verify just before package by  specialist High quality inspector
Dimension Drawings
Deal Wood Case/Container and pallet, or as per customized specifications
Certification ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Benefit Top quality very first Provider exceptional , CZPT d products,Seasoned personnel,Excellent screening gear
Lead Time 15-25days samples. 30-45days offcial order

Tapered sockets are designed for fast assembly and disassembly of pulleys and other transmission equipment without the want for unique equipment other than a hex crucial. Various machined holes guarantee quick community, steering clear of costly factory downtime. Bushings are keyways machined to British Common Specifications. This is in addition to the clamping screw, which is enough for the required torque in a lot of instances. Tightening with a tapered bushing eliminates any hole amongst the hub and the bore, which eradicates fretting corrosion.
china best OEM Special Sprocket Chain Wheels manufacturers