Merchandise Description
Transmaission Metric Decreasing Xihu (West CZPT ) Dis. Brass Drill Nylon Suspension Threaded Steel Delrin Compliance Pipesway CZPT Cable Bonding Bushing
1) V-Belt pulleys for taper bushes
SPZ
|
SPA
|
SPB
|
SPC
|
two)V-belt pulleys with reliable hub
SPZ
|
SPA
|
SPB
|
SPC
|
three) Adjustable CZPT V-belt pulleys prebored and for taper bushes
Variety | Profile |
5VS092-one | 10X6 SPZ |
5VS093-one | 10X6 13X8 |
5VS108-one | 10X6 13X8 SPZ SPA |
5VS120-1 | 10X6 13X8 SPZ SPA |
5VS138-one | 10X6 13X8 SPZ SPA |
5VS159-one | 10X8 SPA |
5VS180-one | 10X8 17X11 SPA SPB |
5VS120-two | 10X6 thirteen X8 SPZ SPA |
5VS138-two | 10X6 thirteen X8 SPZ SPA |
5VS159-2 | 13X8 SPA |
5VS180-two | 13X8 17X11 SPA SPB |
5VS200-2 | 13X8 17X11 SPA SPB |
5VS250-2 | 13X8 17X11 SPA SPB SPC |
Put in 1.1. Thoroughly clean all oil, dust and paint from shafts, bushing holes, bushing exterior and holes of parts (sprockets, pulleys, and so on.). Insert the bushing into the assembly. 3. Match the sample of holes, not threaded holes (every single gap is threaded on one particular side only). Insert the socket head cap screws or screws into the fifty percent-threaded holes revealed in the picture beneath. Put in the assembly on the shaft. 4. Change the torque location or include screw* to the advisable torque placing in the diagram beneath. Fill any unfilled holes with grease.