Solution Description
CDZ collection horizontal lathes are equipped with two programs the two in metric and in inch.
It has vast machining range and sufficient CZPT , substantial rigidity and large effectiveness, operation is hassle-free, protected and trustworthy. Its new slide bearing patented by point out with good antivibrition and constant spindle accuracy and higher machining accuracy roundness tolerance <=0.003mm, roughness value<=Ra1.6µm. CZPT ctric system of different frequency and voltage can be designed to meet the requirements of users.
Principal Technical specs and Features
| SPECIFICATION | CDZ6240 | ||||
|---|---|---|---|---|---|
| CAPACITY | Max. swing diameter above mattress | 400 | |||
| Max. swing diameter more than cross slide | 210 | ||||
| Max. swing diameter in excess of hole | 670 | ||||
| Width of mattress | 400mm | ||||
| Max. duration of workpiece | 2000 | ||||
| SPINDLE | Spindle nose | C6 | |||
| Spindle bore diameter | 52mm | ||||
| Taper of spindle bore | Morse No.6 | ||||
| Range of spindle velocity | 12-1000r/min 24 Sorts | ||||
| FEEDS | Longitudinal feeds assortment | 0.082-1.586mm/r 35 Varieties | |||
| Trasversda feeds range | 0.571-.529mm/r 35 Kinds | ||||
| Metric threads selection | 1-192mm 57 Kinds | ||||
| Inch threads range | 2-24teeth/inch thirty Sorts | ||||
| Module threads selection | 0.twenty five-48mm forty Types | ||||
| Pitch threads range | 1-96teeth/inch 37 Kinds | ||||
| TAILSTOCK | Morsetaper of tailstock sleeve | Morse No.4 | |||
| Travel of tailstock sleeve | 150mm | ||||
| Diameter of tailstock sleeve | 70mm | ||||
| MOTOR | Principal motor CZPT | 5.5kw | |||
| Quick motor CZPT | 0.25kw | ||||
| Amazing pump CZPT | 0.125kw | ||||
Stand Accessories
one.A few jaw chuck/one established 2.Morse No.4/6 heart bush/1 set 3.MT No.4 centre/two sets 4.Oil gun/a single set 5.Tools/1 established 6.Basis screws/a single established 7.Wedge nuts/one established
Specific Equipment
1.Regular support2.Comply with rest3.Splash guarc4.5-placement feed cease drum5.Taper coping device6.4 jaw chuck7.Confront plate8.Drive plate 9.T-kind toolpost10.Chasing dial gadget
This 3020 Tapered Lock Bushing is a high high quality, sturdy, dependable product that is precision manufactured to final and outperform the competitors. 3020 Tapered Locking Bushings are used in a vast range of apps including: pulleys, sprockets, drums, generate pulleys, tail pulleys, pulleys and gears, we also provide this! Additionally, this kit has a 60mm bore and a standard keyway, for much more info on the 3020 Tapered Locking Bushing, make sure you make contact with us and we will be satisfied to support you.