Solution Description

Substantial Alumina Ceramic Tube with Dimensions ten-five hundred mm

Item Description

Ceramic cylinder and phase lined metal pipe are made with the exact same inner diameter as the unlined present pipe ,the cylinder for the lining can be made from CZPT quality of higher alumina ceramics that ideal deal with your working surroundings.For the duration of creation segmented cylinder liners are laid out in preparation for set up . and each and every joint is coated with a specifically formulated epoxy . the ceramic liner is inserted into the steel elbow . the place between the liner and the pipe is loaded with a ceramic mortar specified for your running setting . This composite ceramic steel pipe is largely utilized for conveying ores , sand , coal or chemical liquid .

-FAQ (Frequently Asked Questions )

Q1—-Why Choose Chemshun :
We can afford the standard and pre-engineered tiles
We can afford the fabricated and lined equipment (finished product) according to customer requirement.
We have professional technical team to afford the CAD design drawings for the pre-engineered tiles.
We have professional installation team to afford install service.
We have sincere service spirits to offer the better quality ceramics , keep your order delivery smoothly , 
 
Q 2—- What’s Guarantee of sold Ceramics products ?
one)  we have professional technicians team to inspect the property when buy raw material 
2)  Before mass production , we often make sample for test to avoid production problem 
three)  During half-finished producing process , we have technicians to test the sizes 
four)  After mass production , we have technicians to test finished ceramics property, and ask workers to select the unqualified products in appearance.
5)  At the same time , salesman will go to workshop for quality checking 
six)  Before delivery , we often the test reports for customers  
 
Q 3—-: What’s the MOQ for chemshun Pipe 
We can accept 5 set for pipe size more than 50mm , 10 set for pipe size less than 50mm 
 
Q 4—–:What’s Chemshun Pipe used for ?
Ceramic pipe is used as abrasion & corrosion protection for industrial conveying system 
Like chemicals conveying , high pure powder conveying , waste water & ash delivery ect
 
Q 5—-What’s Chemshun ceramic pipe like ?
 

Q 6—-What if i need to make special ceramics pipe for my equipment ?
Donn’t worry , Chemshun can offer design service according to your equipment drawings , 
Also we offer installation and installatin guide service if you need us help 
 
Do you have any other questions about our ceramic pipe service ? If so , pls send me a inquiry by email , we will try to help you out with our ceramics experience .

More Abrasion ceramics products : abrasion ceramics , Alumina ceramics , wear resistant ceramics , alumina pipe liner , ceramic tube , alumina cylinder pipe , wear resistant alumina plate , abrasion ceramic tile , abrasive alumina sheet , friction plain tile , abrasion weldable tile , rubber backed ceramic liner , ceramic composite linings , alumina mosaic sheet , ceramic taper tile for pipe sleeve ,  ceramic ladder tile for pipe steel , engineering  ceramics equipment , pre-fabricated pipe sleeve ,wear resistant bending pipe , abrasion materials 

Taper lock bushing dimensions are described by 4 digits representing two figures. The initial two digits represent the greatest bore diameter and the final two digits signify the bushing size. For instance, element amount 1008 has a optimum ID of 1.” and an ID measurement of .8″ inches, with the general length specified as a complete quantity of inches followed by a fraction. For instance, a 1.5″ diameter hole would be 1-1/2. Metric gap dimensions are indicated by “MM” right after the metric measurement (X 25MM). Effortless to put in and eliminate, these bushings fit on tapered bushing sprockets, or pulley. Bushing touches and wedges inwards, clamping sprocket shaft and bore. Bushing has an 8° taper and is made of metal with a black oxide coating.