We In 2000, EPG took the direct in gaining ISO14001 setting administration certificate and thereafter handed the inspection of thoroughly clean manufacturing and recycling economic system, winning the title of “ZHangZhoug Environmentally friendly Business”.- EPG Team the greatest agricultural gearbox and pto manufacturing facility in China with 5 diverse branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

 160T Cooper Goods Produced By Vacuum Die Casting Equipment

Prolonged Hua die-casting equipment are applicable to manufacture of ept and motorcycle areas (engine cylinder block, cylinder head, crankcase, hinged doorway handles, oil pan, gearbox housing, gearbox stop cap, dashboard, and so forth.), electric powered escalator handrail/measures, industrial/highway/railway/air/agricultural machinery, streetlights shells,potlight shells, constructing material areas, furnishings, aluminum arts, copper arts, magnesium alloy products, non-ferrous metal processed products and other die casting merchandise.

 LH series of standard parameter table (one hundred sixtyT)

Items	Device	Specification
Hydraulic Working Pressure	MPa	seven
Clamping Force	KN	1600
Place Between Tie Bars	mm	440*440
Tie Bar Diameter	mm	¢80
Die Opening Stroke	mm	350
Injection Pressure(intensify)	KN	220
Plunger Launch Length	mm	120
Injection Place	mm	–140
Plunger Diameter	mm	¢40—-¢60
Injection Stroke	mm	320
Casting Stress (intensify)	MPa	143/92/64
Casting Fiange Protrusion	mm	10
Casting Fiange Diameter	mm	one hundred ten
Max Casting Region Under 40Mpa	CM2	390
lnjection Bodyweight(Al)	Kg	one.eight
Die Height(Min–Max)	mm	200~550
Ejector Force	KN	100
Ejector Stroke	mm	80
Motor Capacity	Kw	eleven
Machine Dimensions  (L*W*H)	m	5*1.4*1.six
Referential Equipment Bodyweight For Uplifting	T	4.8
Oil Tank Potential	L	300

We reserve the right to make any complex improvement with no additional notice

Solution specifics

 Primary performance and features of Xihu (West Lake) Dis.a Die Casting equipments

one.  Double proportional manage (electric powered regulation of pressure and flow, with a multi-level stress and velocity handle as ept as lower strain die close safety features).
2.  Dual circuit layout (air injection and pressure developing are individually developed with no mutual interference and fault event).
three.  Four-phase (multi-phase) injection method:
     A.Optimum speed> 8M/s (6M / s for those far more than 2000T), which can properly control the filling time and casting development, in addition to unique bra ept and uniform acceleration injection function that can successfully stop flash and permit much more adaptable injection process.
     B.Minimum pace .1-.7M/s, which can be precisely controlled to avert air invasion from triggering air lure.
     C.Pressure constructing time ≤15 M/s, which enables to modify force creating speed according to approach demands, strengthening the casting density with no creating solution distortion.
      D.Dry cycle time is decreased by far more than 15% Oil pump stream raises by far more than twenty% Cooler ability is increased by more than 100% Pr sifang power tiller gearbox Florence Italy oportion of conforming completed products increase by one hundred% efficiency is enhanced by twenty% as compared to the past.
4.  The internationally-favorable PLC male-machine interface management system, casting product information storage and monitoring capabilities, well timed alarm in situation of abnormality, and elimination of large quantities of faulty products.
5.  Unique static and dynamic performance with twin main-pulling devices ensures a single-time formation of specific, complex merchandise.
six.  The injection program uses European attract-bar construction with a range of alternatives for middle and eccentric injection positions that provide easy adjustment, large precision, and applicability to numerous complicated molds. 
seven.  Large-scale die-casting equipment previously mentioned 1600T uses hydraulic pumping implies which makes it possible for risk-free and quickly alternative of massive molds.
eight.  Independent rapid clamping technique and special hydraulic driven equipment-variety mould top adjusting system are resistant to affect, providing more time service life and rapidly manufacturing, with an output on a change improved by above fifteen%.
nine.  Liquid nitrogen super low temperature installation method makes certain precision and prolongs provider existence of toggle areas. 
10.  High quality, large rigidity and wear resistant casting platen adopts finite aspect examination style that delivers even pressure distribution, tiny distortion and specific mould clamping. 
11.  Electric central lubrication technique gives scheduled, quantitative lubrication and increases provider lifestyle.
twelve.  Electrical and hydraulic elements are well-known brands produced in Europe, Japan and China ZheJiang .
thirteen.  Die-casting unit island style gives a variety of interfaces and software program offers for a assortment of innovative intelligent peripheral units.
14,  Hydraulic program consists of:The most innovative uniform accelerated multistage injection technique in 10 world

 

Our Services

Pre-Income Services

* Inquiry and consulting support. 

* Sample screening support. 

* See our Factory.

Soon after-Product sales Services

* Coaching how to instal the machine, coaching how to use the equipment. 

* Engineers available to support machinery abroad.

 

Packaging & Shipping and delivery

 

Authentication Certification
 

Our Consumers

FAQ

Q: Are you ept firm or maker ?

Our edge is the manufacturing facility of generation, export solution quality, manufacturing facility immediate prices.

Q:Why select us?

1.Our equipment Effective, power saving, environmental security,Top quality has been recognized by the nationwide top quality supervision division.

2.Our support has been regarded by ept customers.

 

The use of unique equipment manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the detailed substitute elements contained herein are not sponsored, accepted, or produced by the OEM.